CARE
18
Removing the Shade (If Necessary)
■ Fully raise the shade.
■ While holding the headrail, place the
flat blade screwdriver on the installation
bracket’s locking tab.
➤ Insert the screwdriver between the
arrows on the bottom tabs.
CAUTION: Be very careful not to tear or
damage the fabric.
■ Push up to release the shade.
IMPORTANT: On longer shades, you
might need to lower the shade slightly to
access the locking tab.
Cleaning Procedures
Vignette
®
Modern Roman Shades are made of an anti-static, dust-resistant fabric which repels
dirt and dust. For most fabrics, the options below are available if your shade needs cleaning.
Dusting
■ Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■ Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air / Hair Dryer (Cool Setting)
■ Blow dirt and debris from within the fabric folds using clean, compressed air.
Spot-Cleaning
■ Spot clean using a sponge or delicate cloth, warm distilled water, and a mild soap solution.
Handle with care as you would any fine fabric.
■ Dab the spot with the dampened cloth until it is removed. Non-oil-based baby wipes may be
used on more stubborn stains. Do not rub the fabric.
■ Allow the shade to dry in the completely lowered position.
Push
Up
Locking
Tab
Arrows
To Next Page
Loading...
Need help?
General
