Hunter ACC2 - Home and Activity Screens; Activity Screen

12 hunter.direct/ACC2help
Home and Activity Screens
ACTIVITY SCREEN
When the controller is running stations, the Home screen
becomes the Activity screen, with additional information and
functions.
All running stations are displayed, along with the program
that is running them, the mode in which they are running, and
the amount of run time remaining on the station.
Individual items may be selected directly from the activity
screen and stopped without aecting other irrigation. See the
Selective Stop section on page 16.
The so keys normally show Stop, Manual, View Flow (shows
current ow, if a ow sensor is installed and enabled), and
Main Menu. Stop and Manual are described in the Basic
Programming section. View Flow is described in detail in the
Flow Operations section.