Hunter ACC2 - View Configuration; View Status; Decoder View

Built on Innovation
®
55
Decoders Menu
VIEW CONFIGURATION
View Conguration can retrieve all the setup information for
a specied decoder on the two-wire path, or for one attached
to the programming port. It is similar to the Read Decoder
function in the Program Decoder screens, except that it only
retrieves information, and does not allow it to be changed.
View Conguration also retrieves the current rmware version
of the selected decoder.
View Conguration also retrieves complete Port setup
information for sensor decoders.
VIEW STATUS
View Status can target any station or P/MV decoder and show
the current activity and electrical status of the device.
Select Station or P/MV.
Enter Station or P/MV number, and press Read Decoder.
The screen will show status, current draw, voltage on the two-
wire path at the decoder location, whether a load (solenoid or
relay) is present, and whether or not the station is active.
DECODER VIEW
The Decoder View so key shows the status organized by
station outputs within the selected decoder.
Each color-coded wire pair from the decoder will show its
own status.