Hunter ACC2 - Advanced Features

32 hunter.direct/ACC2help
Advanced Features
Advanced Features
EXPORT LOGS
Logs may be exported in a simple text format to the internal
SD card in the facepack if additional help is needed for
troubleshooting, or just for record-keeping purposes.
Enter a unique le name by clicking in the File Name box.
Select the boxes for the types of Logs desired.
Select and click the Export Logs button to save the le to the
SD card. The card may then be inserted into a computer or
other device with SD card reader, and saved or sent to another
location.
EASY RETRIEVE
This saves the current controller setup, so that it may be
restored to this point at a future date.
Controller Memory: Only one setup may be saved in
Controller Memory, and it will remain unless you make
changes and create a new Easy Retrieve backup in the future.
You can choose Restore at any time, and it will change the
whole controller to the last Easy Retrieve backup.
SD Card File: You can also save Easy Retrieve backups to the
SD card via the SD card slot in the facepack (to do this, an SD
card must be installed). You may also restore from the SD card
to any saved Easy Retrieve in the future.
When saving to SD card, you must enter a name for the le.
Click to select the File Name, and a keyboard will appear. Enter
the name for the le, and choose Done from the keyboard
when complete.
Using the SD card and dierent le names allows you to save
as many backups, under dierent names, as the card will hold.
You can restore any one of them from the SD card by entering
the correct le name. The SD card cannot display a list of the
saved les, so be sure to enter the le name exactly as it is
saved on the card.