Hunter ACC2 - Hydraulic Summary; Flow Totals

Built on Innovation
®
39
Flow Operations
HYDRAULIC SUMMARY
Dial to the Flow menu, and select Hydraulic Summary. The
Hydraulic Summary is a report of exactly how the controller
hydraulics are set up at the moment. It shows the connections
of all ow-related objects, from MainSafe™ zones (if
applicable), Flow Zones, Flow Sensors, P/MVs, to individual
stations.
Use the so keys to view by Controller, by Flow Zone, and by
MainSafe (if applicable).
This is the easiest way to review the current setup, and see if
anything is incorrect or incomplete.
FLOW TOTALS
Flow Totals are total amounts of water consumed over a
specied time period. They may also be viewed at dierent
levels, depending on how the controller is congured.
Total Flow is counted by MainSafe (if applicable), by Flow
Zone, and by individual ow sensor.
Flow totals can be viewed at any of these levels by clicking so
keys for Day, Week, Month, or Year. Click the Interval eld to
select a desired date range.
Click in the Interval eld to specify the time period to view.