Hunter MH37 - Page 151

AC Electric Systems
8.9
Figure 8.13
Figure 8.14
Figure 8.15
Figure 8.16
8.3.4.3 Double Line Shore Power to Air Conditioner
If a single shore power is less than 50 amps, a second
shore power line is required to run the air conditioning.
To power the air conditioning, complete the following:
Connect 2 shore power lines to the shore power
inlets and turn shore power on (see Connect and
Turn on Shore Power above).
Switch on line 1 AC Main toggle switch breaker on
the AC panel.
Switch on line 2 AC Main toggle switch breaker on
the AC Panel.
Switch on the forward Air Conditioner toggle switch
breaker at the AC Panel.
Switch on the aft Air Conditioner toggle switch break-
er at the AC Panel.
Switch on the Air Conditioner Relay toggle switch
breaker on the AC Panel.
8.3.4.4 Single Line Shore Power to Air Conditioner
If a single shore power is 50 amps, that line is sufficient to
power both the optional air conditioner and the standard
AC system. To power the air conditioning, complete the
following:
Connect 1 shore power line to a parallel shore power
yoke cord.
Connect both ends of the shore power yoke cord to
the shore power inlets and turn shore power on (see
1.
2.
3.
4.
5.
6.
1.
2.