English-23
DRIVING
4. If the engine is cold, the choke control shall be
moved backwards to its end position.
5. Turn the ignition key to the start position.
6. When the engine starts, immediately release the
ignition key so that it returns to the neutral
position.
7. Move the choke lever gradually forward once the
engine has started.
8009-534
8009-558
8009-559
IMPORTANT INFORMATION
Do not run the starter motor for more than
5 seconds at a time. If the engine does not start
wait about 15 seconds before trying again.
8009-560
To Next Page
Loading...
