English-25
DRIVING
4. Depress the lock button on the mechanical lifting
lever and move the lever to its most forward
position. The cutting unit lowers and starts.
Stopping the engine, PF 18
If the engine has been worked hard, it is preferable to
let the engine idle for a minute so it runs at its normal
working temperature when stopped. Avoid idling the
engine for long periods, as there is a risk of carbon
build-up on the spark plugs.
1. Raise and secure the cutting unit by pulling the
mechanical lifting lever backwards to the locked
position.
If the cutting unit is left in the lower position,
the start lock circuit will prevent you starting
the engine.
2. Move the throttle control to the “MIN” position.
Turn the ignition key to “STOP”.
3. When the machine is at a standstill apply the
parking brake by holding down the pedal and at
the same time press in the release button.
8009-555
8009-554
8009-561
8009-328
To Next Page
Loading...
