EasyManua.ls Logo

Husqvarna ProFlex 21 - Driving the Rider, PF 18

Husqvarna ProFlex 21
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English-24
DRIVING
8. Set the desired engine speed with the throttle.
Allow the engine to run at a moderate speed,
half throttle, for 3-5 minutes before loading it too
heavily.
Driving the Rider, PF 18
1. Release the parking brake by rst pressing the
brake pedal and then releasing it.
2. Carefully press down one of the pedals until the
required speed is attained.
Pedal (1) is pressed down to travel forwards and
pedal (2) to reverse.
3. Select the required cutting height (1-7) using the
cutting height lever.
8009-533
WARNING!
Never run the engine indoors, in
enclosed or badly ventilated areas.
Engine exhaust fumes contain
poisonous carbon monoxide.
6007-208
6007-209
1
2
WARNING!
Never run the engine indoors, in
enclosed or badly ventilated areas.
Engine exhaust fumes contain
poisonous carbon monoxide.
8009-557

Table of Contents

Related product manuals