English-53
MAINTENANCE
Removing the cutting unit
1. Place the machine on a flat surface.
2. Lock the brake by pressing down the pedal and
locking with the push-button.
3. Lift the cutting unit with the mechanical lifting
lever.
4. Remove the front cover.
5. Loosen the belt tensioner spring.
6. Remove the belt from the front pulley.
7. Refit the belt tensioner spring.
8. Hang the belt around the handle.
WARNING!
Exercise caution. Risk of crush injuries
8009-328
8009-375
8009-008
8009-009
To Next Page
Loading...
