English-26
DRIVING
Driving the Rider, PF 21
1. Release the parking brake by first pressing the
brake pedal and then releasing it.
2. Carefully press down one of the pedals until the
required speed is attained.
Pedal (1) is pressed down to travel forwards and
pedal (2) to reverse.
3. Select the required cutting height (1-7) using the
cutting height lever.
4. Depress the lock button on the mechanical lifting
lever and move the lever to its most forward
position. The cutting unit lowers and starts.
6007-208
6007-209
1
2
WARNING!
Never run the engine indoors, in
enclosed or badly ventilated areas.
Engine exhaust fumes contain
poisonous carbon monoxide.
8009-539
8009-537
To Next Page
Loading...
