English-45
MAINTENANCE
Checking the safety system
The Rider is equipped with a safety system that
prevents starting or driving under the following
conditions.
It should only be possible to start the engine when the
cutting unit is in its raised position and the hydrostat
pedals are in the neutral position.
The driver does not need to be seated in the driver’s
seat.
Check daily to ensure that the safety system works
by attempting to start the engine when one of the
conditions is not met. Change the conditions and try
again.
Check that the engine stops if you temporarily move
out of the driver’s seat while the cutting unit is lowered
or the hydrostat pedals are not in the neutral position.
Starter
Ignition System
Works
Does not work
To Next Page
Loading...
