English-29
MAINTENANCE
Maintenance
Maintenance schedule
The following is a list of maintenance procedures that
must be performed on the Rider. For points marked with
footnote number 4, turn to an authorised service
representative.
● = Described in this manual.
❍ = Not described in this manual.
Maintenance Page Daily main-
tenance
Weekly
3
main-
tenance
At
least
once
a year
Maintenance interval
in hours
Check for fuel and oil leaks - ❍
Check the parking brake 38 ●
Check the engine’s oil level
(every refuelling)
64 ●●
Check the fuel pump’s air filter 42 ●
Check the safety switch, seat 45 ●
Check the safety switch, lifting lever 45 ●
Check the safety switch, pedal system 45 ●
Check/clean the engine’s cooling
air intake
33 ●●
Check the cutting unit: 50 ●
• securing of the blades 52 ●
• condition of the blades
(sharpness, shape, etc.)
52 ●
Check the steering cables
(any play, etc.)
35 ●
Check fastenings (screws, nuts, etc.) - ❍
Start the engine and blades, listen
for unusual sounds
22 ●
Clean under the cutting unit 51 ●
Clean the transmission’s cooling air
intake
34 ●●
Check the battery’s acid level 43 ●
Check the transmission oil level 69 ●
Check the condition of belts, belt
pulleys, etc.
- ❍
Check for damage - ❍
Check the air pressure in the tyres
(60 kPa)
43 ●
before after 25 50 100 300
To Next Page
Loading...
