EasyManua.ls Logo

Husqvarna ProFlex 21 - Replacing the Air Filter

Husqvarna ProFlex 21
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English-39
MAINTENANCE
Replacing the air lter
If the engine seems to lack power or does not run
smoothly this may be because the air lter is clogged.
If run with a soiled air lter, carbon can build-up on the
spark plugs and lead to malfunction.
For this reason, it is important to replace the air lter
regularly (see Maintenance schedule on page 29
for the proper service interval).
Replacing the air lter, PF 18
1. Open the engine cover.
2. Undo both of the snap catches and lift off the
cover on the air lter housing.
3. Remove the foam rubber pre-lter and clean using
a mild detergent.
Squeeze it dry with a clean cloth.
WARNING!
Allow the exhaust system to cool before
performing service. Risk for burns.
8009-148
8009-149

Table of Contents

Related product manuals