English-109
REPAIR INSTRUCTIONS
Hydraulic system PT26
Changing hydraulic oil
Viscosity and quality
Hydraulic oil ISO VG.
Viscosity 46 cSt.
Consult Husqvarna AB concerning local envi-
ronmental provisions regarding types of oil,
before types of oil other than those stated by
Husqvarna are used.
Inspectionof the oil level
Open the right-hand engine cover and
remove the filler cap. The level must be
visible in the filler strainer.
8043-108
2. Lift cylinder
3. Control cylinder
4. Control unit
5. Valve block working hydraulics
6. Valve block transmission
7. Wheel motors
8. Pump control- and lifting system
9. Hydraulic pump drive system
10. Flushing valve
11. Inlet strainer
12. Radiator
13. Hydraulic filter
14. Hydraulic tank
8009-878
Oil level, hydraulic tank
To Next Page
Loading...
