English-98
REPAIR INSTRUCTIONS
Swivel castor bearing
1. Remove the screw (9) and washer (8).
2. Remove the fork (7).
3. Replace the bushings (5) if necessary.
4. Assemble in reverse order.
Tightening torque according to the table.
5. Lubricate with lubricant spray and check
that grease penetrates to the upper and
lower bearing.
Swivel castors
1. Remove the screw (12+13) and remove
the wheel.
2. Move the spacing pipe (11) to the new
wheel.
3. Assemble in reverse order. Tightening
torque according to the table.
4. Lubricate with lubricant spray and check
that grease penetrates to both sides.
5
5
4
10
12
14
17
8
9
2
7
6
11
13
14
16
18
19
20
8043-204
Swivel castors with bearing
To Next Page
Loading...
