English-81
REPAIR INSTRUCTIONS
Power transmission
Bleeding the drive system
See the chapter hydraulic systems.
Maintenance of the transmission
The machine is designed for a minimum of
maintenance.
• However, this presupposes that dirt does
not enter the hydraulic system. Read
“Hydraulic system\Hydraulic Hygiene”.
• Do not wash using a high pressure washer
so that water can penetrate into bearings.
• Protect belts against oil, grease and
degreasing agent.
• Check the belts and replace them
according to the service log.
• Lubricate, change the oil and filters
according to the lubrication chart.
WARNING!
Prevent the engine from starting
when working on moving parts.
Take into account the risk of the
engine starting unintentionally
8043-196
Power transmission
To Next Page
Loading...
