Husqvarna PT26D - Steering Console

English-75
REPAIR INSTRUCTIONS
Steering console
Lock
1. Remove the plastic cover (46).
2. Remove the spring (16) and the lock’s
spring (newer version)
3. Keep track of the spring (15) (older ver-
sion) and remove the screws (10). The
spacers (11) are released.
4. Remove the lock backwards.
Steering console
1. Remove the indicator panel, see
“Replacing theindicator panel” on
page 100.
2. Remove the headlight with holder if
necessary. Otherwise, disconnect the
electric cable.
3. Remove the steering wheel hub by
prying it loose using a screwdriver.
4. Remove the steering wheel, secured
using one screw under the steering
wheel hub. Save the key.
5. Remove control unit's fastening bolts.
6. Opened the clamp for the steering wheel
adjustment and fold away the control
unit.
7. Remove the plastic cover (46).
8. Remove the spring (16) and the lock’s
spring (newer version)
9. Remove the screws (17) and lift off the
steering console.
8043-193
Steering console
8043-130
Headlight and indicator panel, parts
8043-127
Control unit, components.