Husqvarna PT26D - Cutting Unit and Torque Specifications

English-15
SPECIFICATIONS
Control and setting values
Induction sensor (sensors) in the safety system; Gap to target 2-3 mm.
Forwards, low speed 13 km/h
Reverse, low speed 13 km/h
Max inclination, all directions 10°
Cutting unit Combi 155
Cutting width 1,550 mm / 61"
Cutting heights 25.4-127 mm / 1"-5"
Blade length 560 mm / 22"
Width 1,610 mm / 5.28 ft
Weight 113 kg / 248 lb
Length machine with unit approximately 2,900 mm / 9.52 ft
Cutting unit Combi 132
Cutting width 1,320 mm / 52"
Cutting heights 25.4-127 mm / 1"-5" Blade length
560 mm / 22" 490 mm / 19.3"
Width 1,340 mm / 52.8"
Weight approximately 100 kg / 13.29kg
Length machine with unit approximately
2,900 mm / 290.17 cm
approximately 2,730 mm / 273.10 cm
Noise emissions with unit C155
Measured noise level 104 dB(A)
Guaranteed noise level 105 dB(A)
Noise emissions with unit C132
Measured noise level 103 dB(A)
Guaranteed noise level 104 dB(A)
Data PT26D Dimensions