-
DELIVERY AND DEALER SERVICE
1. First change after 25 hours. When operating with a heavy load or at high ambient temperatures,
replace the engine oil every 125 hours.
Check the condition of the battery,
clean if necessary
23
Check the oil level in the bevel gear,
top up if necessary
94
Check the wheel nuts -
Check the parking brake, adjust if
necessary
80
Check the safety function 101
Check/adjust the cutting unit settings
(tilt angle)
91
Replace the air filter and clean the
cyclone filter
71
Replace the belts (power take-off
belts and cutting unit belt)
84
95
Check the condition of the hydraulic
hoses
-
Replace fuel filter and check hoses
4)
-
Adjust the valves and check the
engine speed
4)
-
Replace the pump and alternator belt 69
Change the hydraulic oil and filter
1.4)
111
Change the oil in the bevel gear 94
Change the cooling liquid
4)
30
Check all hoses with connections to the
engine and the engine’s mountings
-
Replace the diaphragm for the closed
crankcase ventilation
4)
-
Check cables and terminals in the
electrical system
4)
-
Check generator and starter motor
4)
-
Pressure test the fuel injection
nozzles
4)
-
Check the coolant pump
4)
-
Maintenance Page Daily main-
tenance
Weekly
main-
tenance
Maintenance interval hours
before after
To Next Page
Loading...
