14
4. Repair of this equipment shall be handled by service personnel at Huvitz or a
person with equivalent certification.
5. Customer’s care over this equipment shall be done only according to the User
Manual and Service Instruction. Any other maintenance shall be done by
service personnel at Huvitz or a person with equivalent certification.
6. Manufacturer shall be held responsible for safety, reliability and completion of
this equipment when the following requirements are met: (1) Electrical
installation in each room is in accordance with specifications in this instruction.
(2) This equipment is used, operated and maintained according to this
Instruction and Service Instruction.
7. Manufacturer will not be held responsible for damages by unauthorized
alteration. Such alteration is a threat to customers’ rights specified in warranty.
8. This equipment shall be used with supplementary articles provided by Huvitz. If
a customer intends to use supplementary articles of other manufacturers, user
safety of those articles shall be inspected and certified by Huvitz or
manufacturers of those articles.
9. Only persons with appropriate training and education can be certified for
capability to install, use, operate and maintain this equipment.
10. Please keep User Manual and Service Instruction in an easily accessible place.
11. Do not apply excessive pressure on cable connection. If the cable does not
connect, check to see if the plug is appropriate for socket. Damaged cable plug
and socket shall be repaired by certified service technician.
12. Do not pull the cable. Always hold and pull plug when removing the cable.
13. This equipment can be used as other international purposes for general
examination of lenses in accordance with this instruction.
14. Always conduct a visual examination of the equipment and inspection for
proper functioning before operation.
To Next Page
Loading...
Need help?
General
