67
① Pull the fuse box to remove.
② Replace with a new fuse.
③ Place the new fuse box in the fuse location. .
Auto Lensmeter HLM-1 uses a 250V, T3.15AL fuse.
10.3. Storage
While not use, cover up the device with the dust cover as shown in (Picture : How to store
while not use) for storage.
How to store while not use
If you do not plan to use the device for more than a week, place the dust cap on lens cap
as shown in (Picture : For long-term storage).
To Next Page
Loading...
