17
Instructions for Use
1. Do not hit or drop the equipment. Strong pressure might damage the equipment.
Strong pressure can affect the function of the equipment. Thus, always handle with
care.
2. Install the equipment in a stable place without vibration to maintain normal
condition.
3. Direct sunlight or bright lighting can affect measurement results.
4. Consult with dealers before connecting this equipment to other gears.
5. Rapid heating in a cold place will cause water vapor condensation on optical parts
and lens inside the equipment. In such cases, wait for condensed water vapor to
disappear.
6. Always keep the equipment clean for precise results. Dust can cause a equipment
failure. Always turn off the power and cover with dust cover after use.
7. Do not use organic matters such as thinner or benzene to wipe the equipment as
they can affect the equipment. Use clean cloth or towel.
8. Use of improper battery might lead to an explosion. Always use batteries of proper
standard.
9. Remove power plug and consult with a dealer when smoke, unusual smell or noise
is detected during operation.
10. Do not turn off screen saver without any apparent reasons. This equipment protects
its screen through screen saver.
To Next Page
Loading...
