13
• Avoid installing the device on a place where it is
exposed to direct sunlight or near the
illumination. In particular, ensure that the device
is not illuminated by a spot light from the upper
front.
• Before putting the device on a light-reflecting
surface such as a glass showcase or a shiny
table, put a cloth on it. Reflected light such as
illumination may adversely affect measurements.
2.4. Safety Precaution
This equipment was developed and inspected according to domestic and
international safety standards. It guarantees a high safety grade for this equipment.
Manufacturer is legally bound to provide users with a sufficient explanation on safety
concerns of the equipment. Precise operation is necessary for safe operation. Thus,
please read all instructions safely before operating the equipment. For more specific
information, please inquire with our customer service department or authorized
dealers.
1. This equipment shall not be used in places with danger of explosion or near
flammable, explosive and/or volatile chemical substances such as alcohol and
benzene.
2. Do not store or operate the equipment in humid places. Humidity shall be
maintained at 50% ~ 80% during normal operation. Do not place the equipment
in places where water can splash, drop or sprinkled. Do not place an object
containing liquid or gas above the equipment.
3. This equipment shall be operated by or under supervision of a well-trained and
capable person.
To Next Page
Loading...
Need help?
General
