Huvitz HLM-1 - Distance Viewing Zone Measurement

53
HPE-
8000X
HPE-
8000X
HLM-1
If the lens was not placed properly on ➁, it will be displayed as general lens on
➂.
In such cases, move the lens to progressive band, and it will be converted to
progressive lens measurement screen.
9.3.3. Distance Viewing Zone Measurement
① Move then lens to distance viewing zone. For an eyeglass lens, push till the leg on
lens holder reaches the upper frame of the eyeglass.
② Adjust the lens left-right or upward-downward so the cross mark is located on the
distance viewing zone target center.
③ Distance viewing zone power will be auto-saved when the cross mark reaches the
distance viewing zone target center, and it will move on to near viewing zone
measurement.
If the lens was not placed properly on ➁, it will be displayed as general lens on
➂.
In such cases, move the lens to progressive band, and it will be converted to
progressive lens measurement screen.
!
INFORMATION
!
INFORMATION