ENS 3000 Page2
Status 21.08.2015 HYDAC ELECTRONIC GMBH Part No. 669850
Contents
34
1 Safety Information 5
2 Exclusion of liability 5
3 Functions of the ENS 3000 5
4 Installation 6
4.1 GENERAL INSTALLATION NOTES 6
4.2 INSTALLATION USING HYDAC ACCESSORIES 7
4.2.1 Installation ENS 3000, probe length 9.80 inch 7
4.2.2 Installation ENS 3000, probe length 16.20 inch
(permitted accessories ZBM 19 and ZBM 20) 7
4.2.3 Installation ENS 3000, probe length 20.50 inch
(permitted accessories ZBM 19 and ZBM 20 ) 8
4.2.4 Installation ENS 3000, probe length 28.70 inch
(permitted accessories ZBM 19 and ZBM 20) 8
4.3 IMPORTANT SAFETY NOTES 9
5 Starting up 10
6 Operating keys of the ENS 3000 11
7 Digital display 11
8 Output function 13
8.1 SWITCHING OUTPUTS 13
8.1.1 Switch point setting (SP) 13
8.1.2 Window mode (WIN) 13
8.2 ANALOGUE OUTPUT 14
8.3 SETTING THE SWITCHING POINTS AND
HYSTERESES OR SWITCHING RANGES FOR
WINDOW MODE 14
8.4 SETTING RANGES FOR THE
SWITCHING OUTPUTS 15
8.5 SETTING RANGES FOR THE
WINDOW FUNCTION 16
8.6 SETTING RANGES FOR THE OFFSET 16
9 Basic settings 17
9.1 CHANGING THE BASIC SETTINGS 17
9.2 SUMMARY OF THE BASIC SETTINGS 18
10 Resetting the peak values 21
To Next Page
Loading...
Need help?
General