EasyManuals Logo

HYDACELECTRONIC ENS 3000 User Manual

HYDACELECTRONIC ENS 3000
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
ENS 3000 Page5
Status 21.08.2015 HYDAC ELECTRONIC GMBH Part No. 669850
1 Safety Information
Before commissioning, check the instrument and any accessories supplied. Before
commissioning, please read the operating instructions. Ensure that the instrument is
suitable for your application
Incorrect handling and/or failure to comply with the operating instructions or technical
specifications can result in damage to property and/or persons.
2 Exclusion of liability
This operating manual was made to the best of our knowledge. Nevertheless and despite
the greatest care, it cannot be excluded that mistakes could have crept in. Therefore
please understand that in the absence of any provisions to the contrary hereinafter our
warranty and liability – for any legal reasons whatsoever – are excluded in respect of the
information in this operating manual. In particular, we shall not be liable for lost profit or
other financial loss. This exclusion of liability does not apply in cases of intent and gross
negligence. Moreover, it does not apply to defects which have been deceitfully concealed
or whose absence has been guaranteed, nor in cases of culpable harm to life, physical
injury and damage to health. If we negligently breach any material contractual obligation,
our liability shall be limited to foreseeable damage. Claims due to the Product Liability shall
remain unaffected.
In the event of translation, only the original version of the operating manual in German is
legally valid.
3 Functions of the ENS 3000
Depending on the model, the instrument has the following functions:
Display of the actual fluid level in inch or cm (depending on version).
Display of the actual temperature in °F or °C.
Display of the minimum and maximum value of fluid level or temperature or of a pre-
set switching point
Switching of the switch outputs based on the fluid level or temperature and the pre-
set switch parameters
Analogue output
Menu for the basic settings (ENS 3000 is adjustable to the particular application)
Programming Enables

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HYDACELECTRONIC ENS 3000 and is the answer not in the manual?

HYDACELECTRONIC ENS 3000 Specifications

General IconGeneral
BrandHYDACELECTRONIC
ModelENS 3000
CategorySwitch
LanguageEnglish