HYDACELECTRONIC ENS 3000 User Manual

ENS 3000 Page22
Status 21.08.2015 HYDAC ELECTRONIC GMBH Part No. 669850
11 Programming Enables
The unit has 2 program enables which must both be enabled in order to modify the
settings.
The operating program enable can be set or cancelled during operation. It provides
protection against unintentional alterations of settings.
A programming disable via the main programming enable prevents any changes from
being made to the settings during operation. This serves, for example, as a safety function
or as protection against unauthorised alterations.
11.1 ALTERING THE OPERATING PROGRAMMING ENABLE
Press both arrow keys
simultaneously
→

0s
HYDAC
mode
?
?
HYDAC
mode
?
?
→

6s
→

0s
Display
(release
arrow keys)
FrEE = programming enabled
Loc = programming disabled
Use the or keys to alter the settings
3 s
Pressure display
(Data not changed)
3 s
Pressure display
(Data changed)
ba
r
3
s
Fluid level indication
Fluid level indication

HYDACELECTRONIC ENS 3000 Specifications

General

Brand	HYDACELECTRONIC
Model	ENS 3000
Category	Switch
Language	English