15
5. Status Indications
5.1 LCD Icons
More bars indicate more remaining battery power.
The battery power runs out. Recharge or replace the battery.
The radio detects no signal.
The number of bars indicates the signal strength.
The radio operates in low power mode.
The radio operates in high power mode.
An accessory is connected.
The GPS feature is enabled, and valid positioning data has been received.
The GPS feature is enabled, but no valid positioning data has been received.
The BT feature is enabled.
A BT device is connected.
The radio is in emergency mode.
The radio stays on a site.
The Scrambler or Encrypt feature is enabled.
The Over the Air Encrypt feature is enabled.
The Mode Automatic Switch feature is enabled.
The radio is scanning or hunting.
The radio stays on an active channel.
The radio stays on Priority Channel 1.
The radio stays on Priority Channel 2.
The radio has switched to the mixed channel.
The Non-Dedicated TSCC feature is enabled. (TSCC is short for Trunk Station Control Channel.)
The Monitor feature is enabled.
The radio operates in silent mode.
The radio operates in profile 1.
To Next Page
Loading...
Need help?
General
