To Next Page

To Previous Page

c. Set the call type to Broadcast Call.

d. Press the P1/Answer key or the PTT key.

Through Manual Dialing

On the home screen, enter the broadcast call ID, and then press the P1/Answer key, , or the PTT key.

The broadcast call ID must comply with the dialing rules. For details, consult your dealer.

Through Call Logs

 Go to Menu > Call Logs, select the group call record, set the call type to Broadcast Call, and then press the

P1/Answer key or the PTT key.

 Press the preprogrammed BackDial Call or ReDial Call key, select the group call record, set the call type to

Broadcast Call, and then press the P1/Answer key or the PTT key.

Through One Touch Call/Menu

With the One Touch Call/Menu feature preprogrammed by your dealer, press the preprogrammed One Touch

Call/Menu key.

6.4.2 Receiving a Broadcast Call

You can answer a broadcast call without any operation.

6.4.3 Ending a Broadcast Call

A broadcast call ends in any of the following cases:

 The call duration exceeds the preset time.

 The calling party hangs up.

 The BS signal is lost.

 A pre-emptive call or an emergency call occupies the channel.

 With the Clear Down feature enabled, the calling party changes the contact.

6.5 Include Call (Trunking Only)

An include call is a special group call during which another group is invited during the call hang time. An include

call has the same Talk Priority and Clear Down feature as a group call.

The Include Call feature is preprogrammed by your dealer.

Hytera HP78X User Manual

Other manuals for Hytera HP78X