50
8.13 Stun, Revive, and Kill
In trunking mode, when the radio is stunned by the dispatch station or trunking system, the radio displays "Radio
Stunned". In this case, the radio cannot initiate or receive any network service (including calls and short
messages), but retains features such as registration, revive, kill, and authentication. A stunned radio can restore to
normal use when receiving the revive command from the dispatch station or trunking system. Then the radio
displays "Revive Successful".
In trunking mode, when the radio is killed by the dispatch station or trunking system, the radio displays "Radio
Killed". In this case, the radio is incapable of any function except power-on/off. To restore normal use, send the
radio back to the Company.
The Stun, Revive, and Kill features are preprogrammed by your dealer by default and triggered by the dispatch
station or trunking system.
8.14 Emergency Erase Data
The Emergency Erase Data feature allows the radio to erase encrypted data in case of emergency, so as to prevent
unauthorized access. When erasing the data, the radio stops voice and data services and returns to the home screen.
If this feature is preprogrammed by your dealer, the encrypted data can be erased in the following cases:
Press SK1 and then the PTT key (within 1.5s) for two times, and then press SK1 again.
When the radio is killed, the data on the radio will be erased automatically.
To Next Page
Loading...
Need help?
General
