Hytera HP78X - Connecting a BT Device; BT Audio Switch; Setting the BT

45
8.6 BT

To derive optimal communication quality, we recommend that you use the BT devices approved by the
Company.

If BT earpieces of other companies are used, you must use them with the wireless ring PTT of the
Company. Otherwise, transmission is unavailable through the earpieces.
BT is a wireless technology that supports short-distance communications and data exchange between devices.
You can connect the radio to a BT device through the built-in BT module.
To enable the BT feature, press the preprogrammed BT key, or go to Menu > BT. After this feature is enabled,
the LED indicator flashes blue every 3 seconds.
The BT feature applies only to radios with the BT module.
8.6.1 Connecting a BT Device
1. Turn on the BT device and enter the pairing status. Refer to the accessory manual for details.
2. Search and connect to the BT device.
 Go to Menu > BT > Manual Search > Match PTT/Match Earphone, enter the MAC address, and then
press the OK/Menu key.
 Go to Menu > BT > Auto Search, and then select the BT device from the detected device list.
After the radio is connected to the BT device, the LED indicator of the radio flashes blue every 1.5 seconds.
8.6.2 BT Audio Switch
With the BT device connected, you can press the preprogrammed BT Audio Switch key to switch the audio
output device between BT earpiece and the radio.
8.6.3 Setting the BT
 Changing BT Name
Go to Menu > BT > My Device > BT Devices Name, and then enter the new name.
 Setting Visibility
Go to Menu > BT > My Device > Always Detected, and then enable the feature.
Other BT devices can detect the radio.