39
Select Delete All File to delete all subfolders.
8.2.3 Priority Group (Trunking Only)
With the Priority Group feature preprogrammed by your dealer, you can set the priority level of groups. When
receiving a group service request in a voice call, the radio preferentially participates in the service of the group
with a higher priority.
To enable this feature, go to Menu > Settings > Group Settings > Priority Group > On/Off.
You can set the priority of the group to level 1, level 2, or level 3. Larger number represents higher priority.
8.3 Profiles
The Profiles feature allows you to set the audio, alert tone, and vibration of the radio to suit your preference and
work environments. The profiles include General, Meeting, Outdoor, Covert Mode, and custom mode.
General: This profile is applicable to the low-noise environment, such as a quiet street.
Meeting: This profile is applicable to the indoor environment that is relatively quiet.
Outdoor: This profile is applicable to the high-noise environment, such as a highway.
Covert Mode (preprogrammed by your dealer): This profile is applicable to special situations. The radio
locks the screen and disables all alert tones and LED indications. The radio uses only an audio accessory to
output voice.
Custom: This profile is applicable to other situations.
8.3.1 Switching the Profile
Go to Menu > Profiles, and then select the profile.
Press the preprogrammed Profiles Switch key.
8.3.2 Setting the Alert Tone
1. Go to Menu > Profiles, and then select the profile.
The corresponding Setting tab is displayed.
2. Go to Setting > Tone, and then do the following:
To Next Page
Loading...
Need help?
General
