34
1. Go to Call Settings > Call Divert > On/Off.
2. Enter the divert ID.
8.1.3 Security
Power-on Password
This feature allows you to set the power-on password of the radio. If you enter the wrong password for the preset
consecutive times, the radio cannot be used normally. Contact your dealer to reset the password.
1. Go to Security Settings > Power on Password > On/Off.
2. Enter the password twice.
3. Select Confirm.
Encrypt
The Encrypt feature provides end-to-end encryption for voice and data to protect your voice and data against
eavesdropping.
Enabling the Encrypt Feature
If the radio is preprogrammed with this feature by your dealer, you can enable it in either of the following ways:
Go to Security Settings > Encrypt > On/Off, and then enable the feature.
Press the preprogrammed Encrypt key.
In conventional mode, the Encrypt feature is enabled for the current channel. When switching to the
channel, the radio automatically enables encryption.
Setting the Encrypt Feature
In conventional mode, you can add or select the encrypt key.
1. Add an Encrypt Key
Go to Security Settings > Encrypt > New Key, specify the key-related parameters, and then press the
OK/Menu key.
The following table describes the key-related parameters.
The ID for each key must be unique. The value ranges from 1 to 255.
The key alias is composed of letters, digits, and special characters.
The key length can be 10 characters, 32 characters, or 64 characters.
The key value is composed of digits and letters and within the key length.
To Next Page
Loading...
Need help?
General
