33
Go to Call Settings > ESN Check In Idle, and then do either of the following:
Enable the feature.
The radio responds to the ESN check both during registration and after registration.
Disable the feature.
The radio responds only to the ESN check during registration.
Call Priority (Trunking Only)
The Call Priority feature allows you to set the priority of all voice services except emergency calls. The priority
levels include Low, Medium, High, and Preemption (with the Preemptive Call feature preprogrammed by your
dealer).
When all channels are occupied, the call requests are put in a queue according to their priorities. When a channel
is released, the call with a higher priority will be connected prior to the call with a lower priority.
During group call queuing, only the calling party receives the queuing prompt. During private call queuing, both
the calling party and the called party receive queuing prompt. When the queue is full, the higher-priority calls can
jump the queue, and the lower-priority calls will be extruded out (the system will prompt that it is busy)
accordingly.
Go to Call Settings > Priority, and then select the priority level.
Any Call (Trunking Only)
The Any Call feature allows the radio to initiate a call to a contact whose ID is not in the contact list.
Go to Call Settings > Any Call, and then enable or disable Private ID. With Private ID enabled, you can
call any private contacts. With Private ID disabled, you can call only the private contacts in the contact list
or emergency contact.
Go to Call Settings > Any Call, and then enable or disable Group ID. With Group ID enabled, you can call
any group contacts except that of the background group. With Group ID disabled, you can call only the
group contacts in the contact list, dynamic group, or emergency contact.
Go to Call Settings > Any Call, and then enable or disable Phone. With Phone enabled, you can call any
PABX/PSTN contacts. With Phone disabled, you can call only the PABX/PSTN contacts in the contact list
or emergency contact.
Call Divert (Trunking Only)
When the radio malfunctions or powers off, the Call Divert feature allows the radio to divert calls to a private or
PABX/PSTN contact to ensure communications.
To Next Page
Loading...
Need help?
General
