32
Go to Call Settings > Power Level, and then select High Power or Low Power.
Talker Alias
With the Talker Alias feature preprogrammed by your dealer, you can do either of the following:
Sending the Caller Alias
Go to Call Settings > Talking Alias, and then enable or disable Send Alias.
With the Send Alias feature enabled, you can send the radio alias when initiating a call. The called party can
view the alias on the display and identify the calling party.
Adding a Contact Automatically
Go to Call Settings > Talking Alias, and then enable or disable Auto Add Contact.
When the radio receives a call from unknown calling party with the Send Alias feature enabled, the radio will
automatically save this number to the Contact list.
In conventional mode, this feature is preprogrammed by your dealer. In trunking mode, you can select Auto
Add Contact, and then enable or disable the feature.
Talk Around (Conventional Only)
The Talk Around feature allows you to continue communication in direct mode when the repeater malfunctions or
the radio is out of the coverage of the repeater.
Go to Call Settings > Talk Around, and then enable or disable the feature.
Squelch Level (Conventional Only)
The squelch level refers to the squelch threshold required for the speaker of the radio to be turned on. The higher
squelch level requires a stronger signal.
Go to Call Settings > Squelch, and then select Open, Normal, or Tight.
Press the preprogrammed Adjust Squelch Level key to adjust the level.
Compandor (Conventional Only)
The Compandor feature allows the radio to compress the voice signal when transmitting and decompress the audio
when receiving to improve the audio quality.
Go to Call Settings > Compandor, and then enable or disable the feature.
ESN Check in Idle (Trunking Only)
The ESN Check in Idle feature allows the radio to respond to the ESN check from the trunking system when the
radio is registering or after the radio has registered.
To Next Page
Loading...
Need help?
General
