EasyManua.ls Logo

Hytera PD982 - Charging the Battery

Hytera PD982
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Step 3 Tighten the screw on the accessory plug.
3.6 Charging the Battery
Caution: Use the charger specified by the Company to charge the battery.
Charge the battery fully before initial use because reduction of state of charge may lead to low battery
alarm. You can charge the standalone battery or the radio with battery attached. It is recommended that
your radio remain powered off during charging.
The LED indicator on the charger shows the charging status. For details, see the following table.
LED Indication Charging Status
Flashes red slowly The battery is inserted incorrectly.
Glows red The battery is being charged.
Glows orange The battery is charged to 90% or more.
Glows green The battery is fully charged.

Related product manuals