32
8.4.2 Selecting the Speaker
To set the way in which the radio uses the external or internal speaker, go to Menu > Settings > Radio
Set > MIC & SPK > SPK Selection, and then select one of the following as required:
External First: When an audio accessory is connected, the radio uses the external speaker;
otherwise, it uses the internal speaker.
Only Internal: The radio uses only the internal speaker.
Only External: The radio uses only the external speaker.
8.5 One Touch Call/Menu
The One Touch Call/Menu feature allows you to press the preprogrammed One Touch Call/Menu key
to quickly access a service assigned by your dealer. The services available for assignment are as
follows:
Service Type Description
Voice and data services
in conventional mode
Analog Channel:
Call to a 5-tone or 2-tone contact.
Digital Channel:
Group call, quick text or GPS message to a group contact.
Private call, radio check, remote monitor, radio enable, radio
disable, quick text message, alert call, or GPS message to a private
contact.
All call to an all call contact.
Note: To initiate a one touch call on the digital channel in conventional mode,
you need to press the PTT key after pressing the preprogrammed One Touch
Call/Menu key.
Voice and data services
in trunking mode
Private call, emergency call, preemptive call, text or status message
to a private contact.
Group call, broadcast call, emergency call, preemptive call,
preemptive broadcast call, emergency broadcast call, text or status
message to a group contact.
All call to an all call contact.
Menu
Direct access to the designated menu. Check with your dealer for specific
menus.
To Next Page
Loading...
Need help?
General
