41
The three emergency modes can be combined with any of the following emergency types: Regular,
Silent, and Siren w/ Voice.
8.19.2 Triggering the Emergency Mode
To trigger the emergency mode, press the preprogrammed Emergency On key. The radio then enters
the preset emergency mode with or without indications depending on the preset emergency type.
In trunking mode, you can also initiate an emergency call as follows:
Step 1 Go to Menu > Contact > Favorites, and then select the required group contact.
Step 2 Select Call Type, and then select Emergency Call.
Step 3 Press and hold the PTT key to initiate the call.
If the Call to Follow feature is enabled by your dealer, the radio will transmit automatically. You can
directly speak into the microphone in the preset period.
8.19.3 Exiting the Emergency Mode
To exit the emergency mode (as the initiating party) or emergency alert mode (as the receiving party),
press the preprogrammed Emergency Off key or turn the radio off.
8.19.4 Turning the Man Down Feature On or Off
The Man Down feature allows the radio to enter the emergency mode when it tilts at an angle greater
than the specified angle or stays motionless for a preset period.
To turn this feature on or off, go to Menu > Settings > Radio Set > Man Down, and then select Enable
or Disable.
8.19.5 Turning the Lone Worker Feature On or Off
The Lone Worker feature allows the radio to enter the emergency mode when no operation is detected
for a preset period.
To turn this feature on or off, go to Menu > Settings > Radio Set > Lone Worker, and then select
Enable or Disable.
8.20 Communication Security Services
The features described in this section ensure communication security.
8.20.1 Using the Encrypt Feature
The Encrypt feature prevents eavesdropping and ensures communication privacy. It allows the radio to
automatically encrypt transmitted voice or data. Only the receiving radio with the same key value or ID
can decrypt the voice or data.
To Next Page
Loading...
Need help?
General
