22
6.5 Broadcast Call (Trunking Only)
A broadcast call is a special group call to which the called party cannot respond. Your radio can initiate a
broadcast call only after being authorized by your dealer.
6.5.1 Initiating Broadcast Calls
The following table describes how to initiate a broadcast call.
Manner Operation
Favorites
1. Go to Menu > Contact > Favorites.
2. Select the required group contact, and then press the OK/Menu key.
3. Select Call Type, and then select Broadcast Call.
4. Press or press and hold the PTT key.
Subgroup
1. Press the preprogrammed Subgroup key or go to Menu > Subgroup.
2. Select the required subgroup, and then select Member.
3. Select the required group contact, and then press the OK/Menu key.
4. Select Call Type, and then select Broadcast Call.
5. Press or press and hold the PTT key.
Manual Dial
1. Go to Menu > Settings > Radio Set > Keypad Mode, and then select
Enable.
2. From the home screen, enter the broadcast call number.
3. Press or or press and hold the PTT key.
Call Log
1. Go to Menu > Call Logs > Outgoing/Incoming > Outgoing List/Incoming
List.
2. Select the required group contact, and then press the OK/Menu key.
3. Select Call Type, and then select Broadcast Call.
4. Press or press and hold the PTT key.
ReDial/BackDial
Call Log
1. From the home screen, press or (if preprogrammed as the ReDial or
BackDial key).
2. Select the target group contact from the list, and then press the OK/Menu
key.
3. Select Call Type, and then select Broadcast Call.
4. Press or press and hold the PTT key.
6.5.2 Receiving Broadcast Calls
In conventional mode, when you receive a broadcast call, the radio displays . The call is established
To Next Page
Loading...
Need help?
General
