39
Feature Description Operation
Radio
Enable
Allows you to remotely
enable a disabled radio
for normal operation.
4. Go to Ctrl Services > Alert Call/Radio Check/Remote
Monitor/Radio Enable/Radio Disable.
Radio
Disable
Allows you to remotely
disable another radio.
8.18 Analog Services
The following features are available only on an analog channel in conventional mode.
8.18.1 Turning the Compandor Feature On or Off
The Compandor feature allows the radio to compress transmitted voice signals, which suppresses
ambient noise and improves audio quality.
To turn this feature on or off, go to Menu > Settings > Radio Set > Compandor, and then select
Enable or Disable.
8.18.2 Turning the Monitor Feature On or Off
The Monitor feature allows the radio to receive weak signals.
To turn this feature on, press the preprogrammed Monitor key or press and hold the preprogrammed
Monitor Momentary key. In this case, the radio displays
.
To turn this feature off, press the preprogrammed Monitor key again or release the preprogrammed
Monitor Momentary key.
8.18.3 Turning the Squelch Off Feature On or Off
The Squelch Off feature allows the radio's speaker to keep turned on no matter whether the squelch
condition is satisfied.
To turn this feature on, press the preprogrammed Squelch Off key or press and hold the
preprogrammed Squelch Off Momentary key. In this case, the radio displays
.
To turn this feature off, press the preprogrammed Squelch Off key again or release the preprogrammed
Squelch Off Momentary key.
8.18.4 Setting the Squelch Level
The squelch level refers to the squelch threshold required for the radio's speaker to be turned on.
To set the squelch level, go to Menu > Settings > Radio Set > Squelch, and then select Open, Normal,
To Next Page
Loading...
Need help?
General
