Hytera PD982 User Manual

38
8.15.2 Reporting the Task State
To report the latest state of a task, do as follows:
Step 1 Select the required task as described above.
Step 2 Select the state to be reported, and then press the OK/Menu key.
If the corresponding task state is associated with a numeric key by your dealer, you can also press the
numeric key to report the state after selecting the required task.
8.16 Data Query
The Data Query feature allows you to query related information from a third party by sending the
keyword, for example, a vehicle number.
To query information, do as follows:
Step 1 Go to Menu > Query, and then select the required item.
Step 2 Enter the keyword, and then press the OK/Menu key.
Step 3 (Optional) Enter the password for data query, and then press the OK/Menu key.
8.17 Control Services
On a digital channel in conventional mode, you can initiate the following control services to a private
contact.
Feature Description Operation
Alert Call
Allows you to alert a
private contact to call you
back.
To trigger the corresponding feature, do one of the following:
 Through Favorites/Contact List
1. Go to Menu > Contact > Favorites/Contact List.
2. Select the target private contact.
3. Go to Ctrl Services > Alert Call/Radio Check/Remote
Monitor/Radio Enable/Radio Disable.
 Through Keypad Mode
1. Go to Menu > Settings > Radio Set > Keypad Mode,
and then select Enable.
2. Press to switch the input mode to Private ID.
3. From the home screen, enter the target private ID, and
then press the OK/Menu key.
Radio
Check
Allows you to check
whether another radio is
operating on the current
channel without
disturbing that radio user.
Remote
Monitor
Allows you to remotely
monitor activities
surrounding another
radio.

Hytera PD982 Specifications

General

Brand	Hytera
Model	PD982
Category	Portable Radio
Language	English