18
Mode Manner Operation
Conventio
nal/
Trunking
Call Log
1. Go to Menu > Call Logs > Outgoing/Incoming/Missed > Outgoing
List/Incoming List/Missed List.
2. Select the required private contact.
3. Press or press and hold the PTT key.
6.2.2 Receiving Private Calls
Conventional Mode
When you receive a private call, the radio displays . The call is established automatically.
Trunking Mode
Depending on the system settings, you can answer a private call in one of the following ways:
FOACSU
When you receive a private call, the radio rings and vibrates, and displays
. Press or press
and hold the PTT key within the preset period to answer the call. After the call is established
successfully, the radio displays
.
Off Air Call Set-Up (OACSU)
When you receive a private call, the radio displays
. The call is established automatically.
6.2.3 Ending Private Calls
In conventional mode and trunking mode, a private call automatically ends when the call hang time
expires.
In trunking mode, a private call also ends in any of the following cases:
The calling or called party ends the call by pressing the End key or preprogrammed Clear Down key.
The call duration preset by your dealer expires.
A preemptive or emergency call interrupts the call.
The base station signal is lost.
6.3 Phone Call
In conventional mode, you can initiate a call to or receive a call from a Public Switched Telephone
Network (PSTN) terminal.
In trunking mode, you can initiate a call to or receive a call from a PSTN or Private Automatic Branch
eXchange (PABX) terminal.
To Next Page
Loading...
Need help?
General
