19
6.3.1 Initiating Phone Calls
The following table describes how to initiate a phone call in conventional mode and trunking mode.
Mode Manner Operation
Conventional
Manual Dial
1. Go to Menu > Phone > DTMF Keypad, and then select Enable.
2. Access the phone system in one of the following manner:
If the One-Key Connect feature is enabled, press to transmit the
connect code.
If the One-Key Connect feature is not enabled, enter the
preprogrammed connect code from the home screen, and then press
and hold the PTT key.
3. After accessing the phone system successfully, the radio enters the
DTMF Dial mode.
4. From the home screen, enter the phone number.
5. Press and hold the PTT key.
Contact List
1. Enable the DTMF keypad and access the phone system as
described in the first two steps above.
2. Go to Menu > Phone > Phone Contact, and then select the
required phone contact.
3. Press and hold the PTT key.
Trunking
Preset
Contact
1. Rotate the Group Selector knob to select the required phone
contact.
2. Press and hold the PTT key.
Favorites/Pri
vate Contact
1. Go to Menu > Contact > Favorites/Private Contact.
2. Select the required phone contact.
3. Press or press and hold the PTT key.
Manual Dial
1. Go to Menu > Settings > Radio Set > Keypad Mode, and then
select Enable.
2. From the home screen, enter the phone number.
3. Press or or press and hold the PTT key.
Call Log
1. Go to Menu > Call Logs > Outgoing/Incoming/Missed >
Outgoing List/Incoming List/Missed List.
2. Select the required phone contact.
3. Press or press and hold the PTT key.
To Next Page
Loading...
Need help?
General
