35
drops or discontinuous voice caused by low signal strength.
To turn this feature on or off, go to Menu > Hunt > Handover > Handover On/Off, and then select
Enable or Disable.
8.8 Roam
The Roam feature allows you to enjoy seamless communication across sites or networks.
In conventional mode, you can turn this feature on or off as follows:
Step 1 Go to Menu > Roam > Roam On/Off.
Step 2 Select On or Off.
In trunking mode, only your dealer can turn on or off this feature.
8.9 Talk Around
The Talk Around feature allows your radio to continue transmitting and receiving when the repeater is
not operating, or when your radio is out of the repeater's coverage but within other radio's coverage.
To turn this feature on or off, go to Menu > Settings > Radio Set > Talk Around, and then select
Enable or Disable.
8.10 Time-out Timer
The Time-out Timer (TOT) feature allows the radio to automatically stop transmission and keep beeping
when the period preset by your dealer expires. To stop beeping, release the
PTT key. You need to wait for
a certain period (also preset by your dealer) to initiate transmission again.
This feature aims to prevent a radio user from occupying a channel for an extended period. It also avoids
potential radio damage caused by overheating.
8.11 VOX
The VOX feature allows you to transmit voice without pressing and holding the PTT key. The radio
automatically transmits voice when the volume reaches the preset level.
To turn this feature on or off, go to Menu > Settings > Radio Set > VOX > On/Off, and then select On or
Off. When this feature is enabled, the radio displays
After enabling this feature, you can set the sensitivity of the external or internal microphone. Do as
follows:
Step 1 Go to Menu > Settings > Radio Set > VOX > Gain Level > External/Internal.
To Next Page
Loading...
Need help?
General
