5
L.. SOCKETS
• Always use premium impact grade sockets.
• Always use the strongest socket for the job.
• Always react the wrench in-line with the nut.
• Always take special care with extensions and adapters.
• Always pin the socket to the drive.
• Never use a cut-down or modified socket.
• Never strike a socket under load.
• Always avoid the danger zones.
• Always inspect every socket before use.
• Always make sure the socket’s width across flats (AF) matches that of the nut or bolt.
• Do not use common extension pieces or step-up/step-down adapters. HYTORC can develop customized
accessories to ensure safe operation. Contact your local HYTORC representative for information.
• Do not use chrome-plated sockets, sockets that have been excessively heated or cooled or sockets that are
deformed or brittle from use.
M. GENERAL OPERATOR GUIDELINES
• Only qualified personnel who have thoroughly read this document may operate this tool. Failure to safely
operate this tool may result in serious injury or death.
N. PERSONAL PROTECTIVE EQUIPMENT PPE
• Always wear appropriate protective equipment including gloves, impact-resistant eye protection, hearing
protection, hard hat and safety shoes when operating tool. Check local conditions for each use.
To Next Page