NOTICE OF PROPRIETARY RIGHTS: HYTORC Division UNEX Corporation (“HYTORC”) is the owner of all content included in this document and all right, title and interest to such content shall
remain with HYTORC. COPYRIGHT NOTICE: © 2021 HYTORC. Any unauthorized use or distribution of any material from this document, without HYTORC’s written permission, is strictly prohibited.
TRADEMARK NOTICE: This document contains numerous registered trademarks and servicemarks of HYTORC in the U.S. and other countries. PATENT NOTICE: Products in this document are
covered by numerous registered and/or pending patents in the U.S. and other countries.
This manual provides information for the MXT+ Hydraulic Torque Wrench models MXTP, MXTP, MXTP, MXTP
Notice. The information contained in this document is subject to change without notice. Visit HYTORC.com for the most current version
of this user manual. HYTORC Division UNEX Corporation (“HYTORC”) makes no warranty of any kind regarding this material, including
but not limited to implied warranties of merchantability and fitness for a particular purpose. HYTORC shall not be liable for errors
contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. It is
recommended that the end-user or repair technician insure they have obtained and are familiar with the latest version of the manual for
the equipment outlined in this document.
Restricted Rights Legend. Use and duplication of the information contained within this manual is limited to the purchaser, end user,
or licensed HYTORC representative. It is recommended that proper training for the equipment outlined in this manual be conducted by
a HYTORC-authorized training representative for any person who is operating or repairing the equipment outlined in this document.
Modification of, or disclosure by any other agency or representative is strictly forbidden.
Product Modifications. HYTORC does not allow any product in this manual to be modified by any end user, without exception. Should an
application require modification to a product please consult your local HYTORC representative.
NOTICE OF PROPRIETARY RIGHTS: HYTORC is the owner of all content included in this document and all right, title and interest to such
content shall remain with HYTORC.
COPYRIGHT NOTICE: © 2021 HYTORC. Any unauthorized use or distribution of any material from this document without written
permission is strictly prohibited.
TRADEMARK NOTICE: MXT® and MXT+ are trademarks of HYTORC. This document contains numerous registered, unregistered and/or
pending trademarks and service marks of HYTORC in the U.S. and other countries.
PATENT NOTICE: Products in this document are covered by issued and/or pending patents in the U.S. and other countries.
Warranty. The MXT+ Hydraulic Torque Tool has a two-year limited warranty. Every tool is tested before leaving the factory and is
warranted to be free from defects in workmanship and materials. HYTORC will repair or replace, without charge, any tool which, upon
examination, proves to be defective in workmanship or materials for two (2) years after the date of purchase. This warranty does not cover
damage resulting from repairs made or attempted by unauthorized repair facilities or technicians. The repair and replacement remedies
described herein are exclusive. In no event shall HYTORC be liable for any incidental, special, or consequential damages, including loss of
profits. This warranty is exclusive and in lieu of all other warranties or conditions, written or oral, expressed or implied for merchantability
or fitness for particular use or purpose. This warranty gives you specific legal rights. You may also have other rights that vary from
state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or
consequential damages, the above limitations or exclusions may not apply to you. If you have questions about the warranty, contact our
customer service center at 201-828-5270.
Printed in the USA. April 2021
ORIGINAL INSTRUCTIONS
ABOUT THIS DOCUMENT
To Next Page
Loading...
