Hytorc MXT+ Series - Care and Maintenance; Tool Maintenance

MXT+ Hydraulic Torque Wrench Basic Operations Manual
16
TOOL MAINTENANCE
• Maintenance must be performed by a qualified technician.
• Use rear spline cover to protect tool when not in use.
• Inspect the tool before each use. Repair or replace any obviously worn or damaged parts.
• Have the tool disassembled, cleaned, inspected and lubricated at least regularly. More frequent maintenance may
be appropriate depending on local practice, usage and conditions.
• Modifying any of the components will invalidate the warranty.
CALIBRATION
• HYTORC recommends all tools be tested and recalibrated periodically. More frequent calibration may be
appropriate depending on local practice, usage and conditions.
• Customer/user is responsible for arranging testing and recalibration.
• Contact 1-800-FOR-HYTORC for assistance or further information.
• When not in use store tool, components, instructions and calibration reports in plastic storage case.
. CARE AND MAINTENANCE