To Next Page
S
Samantha CarrollAug 14, 2025
What to do if IAI ACON-C Controller has connection error?
- PperryanthonyAug 14, 2025
If you are experiencing a connection error with your IAI Controller, or suspect disconnection or pinching, check the cables.
What to do if IAI ACON-C Controller has connection error?
If you are experiencing a connection error with your IAI Controller, or suspect disconnection or pinching, check the cables.
What to do if there's an alarm on my IAI Controller?
If there is an alarm, an emergency stop has been activated, or the motor drive power is off, check the status indicator lamps.
How to check alarm details for IAI ACON-C?
To check alarm details for your IAI Controller, check for an alarm and confirm the specifics of the error on the PC or teaching pendant.
How to fix noise issue in IAI Controller?
To address noise issues with your IAI Controller, check the noise elimination measures, such as grounding and the installation of a surge killer.
How to check voltage in IAI Controller?
To check the voltage in your IAI Controller, check the voltage of the main 24-VDC power supply.
How to check voltage of I/O signals in IAI ACON-C?
To check the voltage of I/O signals in your IAI Controller, check the voltage of the 24-VDC power supply for I/O signals.
What to do if the cause of problem in IAI ACON-C Controller is unknown?
If the cause of the problem is unknown, review the events leading to the occurrence of the problem, as well as the operating condition at the time of occurrence.
How to check serial number of IAI ACON-C Controller?
To check the serial number of your IAI Controller, check the serial numbers of the controller and actuator.
What to do if the IAI Controller fieldbus module is not detected?
If the IAI Controller's fieldbus module is not being detected, try reconnecting the power. If the problem continues after reconnecting the power, it is recommended to contact IAI.
General| Brand | IAI |
|---|---|
| Model | ACON-C |
| Category | Controller |
| Language | English |
General safety precautions for product usage, including model selection and environmental considerations.
Explanation of warning levels (Danger, Warning, Caution, Notice) and their associated symbols.
Recommendations for proper product handling and network setup, including hub usage and auto-negotiation.
Technical specifications for EtherNet/IP communication standards, baud rate, cable length, and connectors.
Overview of operational modes and key functions for ACON/PCON controllers with EtherNet/IP.
Identification of EtherNet/IP related components like ports and status LEDs on the controller.
Procedures for configuring controller parameters like operation mode, baud rate, IP address, and gateway.
Details on PLC I/O area allocation for different operation modes and master station communication.
Explanation of various I/O control signals and their functions for communication.
Overview of operational modes and key functions for PCON-CA/CFA controllers with EtherNet/IP.
Identification of EtherNet/IP related components like ports and status LEDs on the controller.
Procedures for configuring controller parameters like operation mode, baud rate, IP address, and gateway.
Details on PLC I/O area allocation for different operation modes and master station communication.
Overview of operational modes and key functions for SCON-CA controllers with EtherNet/IP.
Identification of EtherNet/IP related components like ports and status LEDs on the controller.
Procedures for configuring controller parameters like operation mode, baud rate, IP address, and gateway.
Details on PLC I/O area allocation for different operation modes and master station communication.
Practical examples for connecting with Omron master devices, including network configuration.
Step-by-step guide for PLC configuration using CX-Programmer for EtherNet/IP communication.
Step-by-step guide for PLC configuration using Network Configurator for EtherNet/IP communication.
Procedure to verify I/O data communication between PLC and controller using CX-Programmer.
