IBM 7212 102 User Manual

YES Cleaning the devices corrected the problem.
Step 24
This step verifies that the installed devices can read from and write to the media
properly.
1. At the command line on any AS/400 or iSeries menu, type
vfytap
then press Enter.
2. Follow the screen prompts.
Does the tape verification test complete successfully?
NO Perform the following:
1. Power off the tape drive and then power it back on to attempt to reset
the error.
2. Obtain a new test cartridge and repeat Step 24.
3. If the test fails again, replace the failing device.
YES
If no problem was identified, the problem may be intermittent, related to
the tape quality, or relating to the environment. If a FRU was replaced or
changed and no more errors occur, the problem is fixed.
This
completes the MAPs for the AS/400 or iSeries host system.
Chapter 2. Maintenance Analysis Procedures 25

IBM 7212 102 Specifications

General

Brand	IBM
Model	7212 102
Category	Storage
Language	English